Alto Elevators

The ALTO Air

Engineered as a system. Designed as a space.

ALTO Air is a refined elevator system designed to integrate seamlessly within contemporary architecture. Built on a modular platform, it offers a balance of performance, flexibility, and design clarity.

ALTO Air. Designed in Australia.

A modular platform, tailored through materiality.

With a focus on proportion and detail, Air allows each installation to be tailored through a curated selection of finishes, lighting, and interior configurations. It adapts to residential and commercial environments with ease.

  1. Innovative shaft system

    An integrated structural shaft that pairs cleanly with masonry or steel substructures, simplifying coordination on every site.

  2. A-grade electric drive

    Fully electric operation with A-grade energy class, designed for long service life and minimal running cost.

  3. No machine room required

    The integrated system eliminates the need for a separate machine room, recovering valuable floor area for the home.

  4. Quiet operation

    Engineered for smooth, low-noise performance in residential environments, so the lift recedes into the architecture.

  5. Customisable interiors

    Flexible finishes and configurations are tailored to each project, with material choices that respond to the surrounding architecture.

  6. Compact footprint

    An optimised structural envelope maximises usable cabin space within minimal shaft dimensions.

Three directions

Each cabin, an architectural decision.

ALTO Air takes three considered directions, from minimalist restraint to bespoke material expression. Each is fully customisable. These are starting points, not endings.

Scroll to explore

  1. 01

    Less is More

    Minimalistic Design

  2. 02

    Architecturally Defined

    Fully Custom

  3. 03

    Layered Materials

    Refined Contrast

Less is More configuration

01Minimalistic Design

Less is More

This configuration represents a clean and understated approach within ALTO Air. Defined by neutral tones, seamless surfaces, and soft lighting, it creates a calm and refined space where the lift integrates effortlessly into the architecture.

Ceiling

Powder-coated steel ceiling panel in RAL 9001 (Cream White) with surface-mounted LED light panels and opal diffusers (3000K).

COP

Flush-mounted control panel with minimalist interface, finished in RAL 9001 powder-coated steel. Anti-fingerprint surface with integrated LED indicators.

Car Wall
  • Front Wall Mirror-polished stainless steel panel (Clear finish), full height.
  • Rear Wall Centre-opening sliding door panels in powder-coated steel, RAL 9001 (Cream White), matte finish (~30% gloss).
  • Right and Left Wall Upper section in powder-coated steel, RAL 9001, matte finish, with integrated COP and anti-fingerprint treatment. Lower section in white marble-effect panel with beige veining, honed finish.
Car Door

External face, brushed stainless steel. Internal face powder-coated steel in RAL 9001 (Cream White), matte finish and anti-fingerprint coating, engineered for smooth and quiet operation.

Flooring

Porcelain tile flooring with white marble-effect finish and beige veining (Carrara type), honed surface, slip resistance rating R10.

Architecturally Defined configuration

02Fully Custom

Architecturally Defined

One of the many design possibilities within ALTO Air. Each project is fully customisable, from materials and finishes to lighting and detailing, allowing complete freedom to integrate the lift seamlessly into your space.

Ceiling

Metallic steel plate with fine sandblasted texture (off-white finish), featuring integrated linear LED light strips for soft, uniform illumination.

COP

Semi-recessed 13.3″ full-bonding high-definition touchscreen, finished in sand tone with minimalist interface and responsive control.

Car Wall
  • Front and Side Wall Sandblasted stainless steel panels with champagne gold finish and anti-fingerprint treatment. Integrated mirror panel with subtle reflectivity and concealed 3000K LED base lighting.
  • Control Wall Aluminium alloy frame with champagne-finished stainless steel insert, anti-fingerprint surface, and integrated COP system.
  • Left Side Wall Aluminium alloy frame with sandblasted stainless steel panels in champagne finish, incorporating concealed 3000K LED base lighting.
Car Door

Sandblasted stainless steel door panels with champagne finish and anti-fingerprint coating, engineered for smooth and quiet operation.

Flooring

Classic Beige Carrara marble-effect finish with subtle veining.

Layered Materials configuration

03Refined Contrast

Layered Materials

A contemporary configuration defined by contrasting finishes, reflective surfaces, and integrated lighting. Designed to create depth, atmosphere, and a strong architectural identity.

Ceiling

Mirror-finish stainless steel ceiling panel, high reflectivity, smoke finish. Integrated concealed LED lighting (3000K).

COP

Flush-mounted control panel in black glass finish with stainless steel detailing and integrated LED indicators.

Car Wall
  • Front Wall Centre-opening sliding door panels in dark tinted stainless steel. Dark grey panel (timber-look), matte surface.
  • Rear Wall Combination panel system. Central panel: mirror-finish smoke stainless steel. Back panel dark grey (timber-look), matte surface.
  • Right and Left Wall Vertical timber-slatted panels in oak tone with integrated linear LED strip lighting (3000K). Back panel dark grey (timber-look or composite finish), matte surface. Integrated horizontal handrail in brushed gun metal.
Car Door

Centre-opening sliding door system. External face: smoked mirror glass finish. Internal face: dark tinted stainless steel finish. Anti-fingerprint treatment, minimal framing.

Flooring

Grey marble-effect, matte finish, subtle veining, suitable for high-traffic use.

Ceilings

Light becomes architecture.

Eight ceiling treatments, from minimalist linear lights to dynamic geometric and starry patterns. Each combines elegance, functionality, and ambient illumination.

Flooring

Grounded in design. Defined by detail.

A curated selection of stone, marble, woven textures, and premium vinyl. Every floor finish enhances the cabin experience while delivering durability and slip resistance.

Wall finishes

Material systems for interior expression.

Six wall compositions, each engineered to work as a cohesive interior language. From minimal and refined to rich and expressive.

Explore finishes
Bronze Articulation

01

Bronze Articulation

A wall composition combining a serigraphed mirror feature panel, powder-coated curved panels in cream tones, and matte bronze side finishes. The contrast between reflective and matte surfaces introduces depth, defined by articulated panel joints, metallic trims, and integrated handrails. The result is a warm, refined interior aesthetic where layered materials, precise detailing, and bronze tones deliver a cohesive and elegant spatial experience.

  • Metal Mirror Finish | Perforated
  • Powder Coated | Cream Tone
  • Matte Metallic | Bronze
  • Brushed Finish | Bronze

Doors and entrances

The first impression of every journey.

Crafted to define the entrance with precision and elegance. Available in glass, steel, and bespoke finishes, with swing and automatic configurations.

01

Automatic Centre Opening

A balanced centre-parting entrance with clean symmetry and a precise architectural face. Suited to projects where the lift opening should read as calm, composed, and fully integrated.

Automatic Centre Opening

Accessories

The Details That Define Every Interaction

A selection of finely crafted elements that complete the lift environment, where functionality meets design. Each accessory from control panels to integrated handrails is thoughtfully developed to complement the material palette.

Control panels

Car Operation Panel

Elegant control interface with precision-engineered buttons and integrated displays. Available in multiple finishes to match your cabin specification.

Car Operation Panel variant 1
Car Operation Panel variant 2
Car Operation Panel variant 3
Car Operation Panel variant 4
Car Operation Panel variant 5
Car Operation Panel variant 6

Hall stations

Hall Operation Panel

Minimalist landing station designed to complement any architectural entry. Discreet profiles with responsive touch or button interfaces.

Hall Operation Panel variant 1
Hall Operation Panel variant 2
Hall Operation Panel variant 3
Hall Operation Panel variant 4

Elevator Shafts

Open Frame Structure

Structural clarity

Open Frame Structure

A structural system designed for seamless integration within built environments, providing flexibility for customised enclosures and finishes.

Panoramic Glass Structure

Design statement

Panoramic Glass Structure

A transparent shaft solution that elevates the lift into a design feature, enhancing spatial perception through light and openness.

Technical Specifications

Four sizes. Two shaft systems. Six door configurations.

The following specifications relate to ALTO Air configurations with swing and sliding doors, within masonry (MS) and steel (SS) shaft systems. Size classifications include: Compact (C), Standard (ST), Spacious (S), and Extended (EX).

SizeSWSDCWCDDOKG
CCompact111510451000700685250
STStandard121511451100800785320
SSpacious131512451200900785400
SW
Shaft width
SD
Shaft depth
CW
Cabin width
CD
Cabin depth
DO
Door opening
KG
Capacity

All information provided is indicative and for reference only. Project-specific drawings and documentation will be issued prior to construction. These specifications must not be used for construction purposes.

Considered vertical movement

Let's design the lift for your build.

Tell us about your project and our team will respond within 48 hours.

Start an enquiry